Personel

Prof.Dr. ALİ ARSLAN KAYA
Prof.Dr.
Ali Arslan Kaya
@ E-posta
aakaya@mu.edu.tr
Telefon
0252 211 1925

Kadro Bilgileri

Görev Birimi

Mühendislik Fakültesi / Metalurji Ve Malzeme Mühendisliği Bölümü / Metalik Malzemeler Anabilim Dalı

Kadro Birimi

Mühendislik Fakültesi / Metalurji Ve Malzeme Mühendisliği Bölümü / Metalik Malzemeler Anabilim Dalı

Öğrenim Bilgileri

Lisans

Istanbul Technical University Chemical and Metallurgical Engineering Faculty Metallurgy / Materials June 1984

Yüksek Lisans

Istanbul technical University Chemical and Metallurgical Engineering Faculty Materials June 1986

Doktora

University of Oxford Materials Science Malzeme 09.03.1993

Yayin Bilgileri

(A-1) SCI veya SCI Expanded, SSCI, AHCI tarafından taranan dergilerde yayımlanan tam makale

1-) Metalnikov Polina, Kaya Ali Arslan, Ben-hamu Guy, Eliezer Dan, 2023. Effect of different hydrogen fugacities on the microstructure of additively manufactured Ti-6Al-4V. Journal of Materials Characterization
2-) Pasquale Guglielmi, Kaya Ali Arslan, Türe Yiğit, Ataman Alican, Arıkan Erkan, Sorgente Donato, Palumbo Gianfranco, 2019. Deformation Capacity of a Ternary Magnesium Alloy in a Gas-Forming Process at Elevated Temperatures. JOM
3-) Sorgente Donato, Palumbo Gianfranco, Fortunato Alessandro, Ascari Alessandro, Kaya Ali Arslan, 2018. Forming Behaviour at Elevated Temperature of a Laser Heat-Treated AZ31 Magnesium Alloy Sheet. Materials Science Forum
4-) Kaya Ali Arslan, Eren Dilara, Turan Dilek, Donato Sorgente, Palumbo Gianfranco, 2017. Evolution of Microstructure and Texture in AZ31 Alloy Subjected to Gas Forming. JOM
5-) Ataman Alican, Kaya Ali Arslan, Türe Yiğit, 2017. Effect of Yttrium Addition on Mechanical and Microstructural Properties of Magnesium Alloy Systems. IJASEAT
6-) Türe Yiğit, Kaya Ali Arslan, Ataman Alican, 2017. Effect of Cerium Addition on Microstructure and Mechanical Properties of Magnesium Alloys. IJASEAT
7-) Tülek R, Arslan Engin, Bayraklı A, Turhan S, Gökden S, Duygulu Özgür, Kaya Ali Arslan, T Fırat, Teke A, Özbay Ekmel, 2014. The effect of GaN thickness inserted between two AlN layers on the transport properties of a lattice matched AlInN AlN GaN AlN GaN double channel heterostructure. Thin Solid Films
8-) Çelikin Mert, Kaya Ali Arslan, Pekgüleryüz Mihriban, 2012. Effect of Manganese on the Creep Behavior of Magnesium and the role of Mn Precipitation during Creep. Materials Science and Engineering A
9-) Çelikin Mert, Kaya Ali Arslan, Gauvin R, Mihriban Pekgüleryüz, 2012. Effects of Manganese on the Microstructure and Dynamic Precipitation in Creep Resistant Cast Mg Ce Mn alloys. Scripta Materialia
10-) Çelikin Mert, Kaya Ali Arslan, Pekgüleryüz Mihriban, 2012. Effect of Manganese on the Creep Behavior of Magnesium and the role of alpha Mn Precipitation during Creep. MSE-A
11-) Sevik, S., Kaya, A.A., 2012. Microstructural Investigation and the Creep Behavior of Mg-Sr-Mn Alloys. Materials Science and Engineering
12-) Sevik, S., Kaya, A.A., 2012. Effects of Manganese on the Microstructure and Dynamic Precipitation in Creep Resistant Cast Mg-Ce-Mn alloys. Scripta Materialia
13-) Celikin Mert, Kaya Ali Arslan, Pekgüleryüz Mihriban, 2012. Microstructural Investigation and the Creep Behavior of Mg Sr Mn Alloys. MSE-A
14-) E. Willbold, A. A. Kaya, R. A. Kaya, F. Beckmann, F. Witte, Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site, Materials Sci. and Eng. B, 176(2011)1835-1840. - 2011
15-) Willbold E, Kaya Ali Arslan, Kaya R Alper, Beckmann F, Witte Frank, 2011. Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site. MSE-B
16-) Engin Arslan, Özgür Duygulu, Ali Arslan Kaya, Ali Teke, Süleyman Özçelik, Ekmel Ozbay, The electrical, optical, and structural properties of GaN epitaxial layers grown on Si(111) substrate with SiNx interlayers, Journal of Superlattices and Microstructures, 46 (2009) 846-857. - 2009
17-) E. Arslan, M. K. Ozturk, Ö. Duygulu, A. Arslan Kaya , A. Teke, S. Ozcelik and Ekmel Ozbay, ‘The influence of nitridation time on structural and optical properties of GaN grown on Si(111) substrate, Materials science & Processing, Applied Physics A (2009)94:73-82. - 2009
18-) G. Gertsberg, E. Aghion, A. Arslan Kaya and D. Eliezer, Advanced production and properties of die cast magnesium composites based on AZ91 and SiC, Journal of Materials Engineering and Performance, JMEPEG (2009) 18:886–892. - 2009
19-) Gertsberg German, Aghion Eli, Kaya Ali Arslan, Eliezer Dan, 2009. Advanced production and properties of die cast magnesium composites based on AZ91 and SiC. Journal of Materials Engineering and Performance
20-) Arslan Engin, Duygulu Özgür, Kaya Ali Arslan, Özçelik Süleyman, Özbay Ekmel, 2009. The electrical optical and structural properties of GaN epitaxial layers grown on Si 111 substrate with SiNx interlayers. SUPERLATTICES AND MICROSTRUCTURES
21-) Arslan Engin, Öztürk K Mustafa, Duygulu Özgür, Kaya Ali Arslan, 2009. The influence of nitridation time on the structural properties of GaN grown on Si 111 substrate. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
22-) A. A. Kaya, O. Duygulu, S. Ucuncuoglu, G. Oktay, D. S. Temur, O. Yucel, ‘’ Production of 150 cm wide AZ31 magnesium sheet by twin roll casting’’, Trans. Nonferrous Met. Soc. China, 18(2008) 185-188. - 2008
23-) Kaya Ali Arslan, Duygulu Özgür, Üçüncüoğlu Selda, Oktay Gizem, Temur D Sultan, Yücel Onuralp, 2008. Production of 150 cm wide AZ31 magnesium sheet by twin roll casting. Transactions of Nonferrous Metals Society of China
24-) Duygulu Özgür, Kaya Ramazan Alper, Oktay Gizem, Kaya Ali Arslan, 2007. Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant. Materials Science Forum
25-) R.A. Kaya, H. Çavuşoğlu, C. Tanık, A. A. Kaya, Ö. Duygulu, Z. Mutlu, E. Zengin, Y. Aydın, ‘The Effects of Magnesium Particles on Posterolateral Spinal Fusion: An Experimental in Vivo Study in a Sheep Model’, J. Neurosurgery Spine 6:141–149, 2007. - 2007
26-) A. Demir, E. Akman, T. Canel, S. Ertürk, A. Arslan Kaya, N. Kenar, T. Sınmazçelik, O. Urhan, Optimization of Nd:YAG Laser Welding of Magnesium, JLMN-Journal of Laser Micro/Nanoengineering Vol. 2, No. 1, 2007. - 2007
27-) A. Arslan Kaya, O. Duygulu, O. Yucel and D. Eliezer, Effect of Grain Size on Necklace Formation of Magnesium Alloys, Materials Science Forum Vols. 546-549 (2007) pp. 233-236. - 2007
28-) O. Duygulu, A. Arslan Kaya, G. Oktay and F. Cinar Sahin, Diffusion Bonding of Magnesium, Zirconium and Titanium as Implant Material, Materials Science Forum Vols. 546-549 (2007) pp. 417-420. - 2007
29-) O. Duygulu, R. Alper Kaya, G. Oktay and A. Arslan Kaya, Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant, Materials Science Forum, Vols. 546-549 (2007) pp. 421-424. - 2007
30-) Oktay Gizem, Duygulu Özgür, Kaya Ali Arslan, 2007. Magnesium Films Deposited on Different Substrates via Arc PVD Method. Materials Science Forum
31-) Duygulu Özgür, Kaya Ali Arslan, Oktay Gizem, Şahin Filiz Çınar, 2007. Diffusion Bonding of Magnesium Zirconium and Titanium as Implant Material. Materials Science Forum
32-) Kaya Ali Arslan, Duygulu Özgür, Yücel Onuralp, Eliezer Dan, 2007. Effect of Grain Size on Necklace Formation of Magnesium Alloys. Materials Science Forum
33-) Demir A, Akman E, Canel T, Ertürk S, Kaya Ali Arslan, Kenar N, Urhan O, 2007. Optimization of Nd YAG Laser Welding of Magnesium. Journal of Laser Micro/Nanoengineering
34-) Kaya Ramazan Alper, Çavuşoğlu H, Tanık Canan, Kaya Ali Arslan, Duygulu Özgür, Zengin E, Aydın Yunus, 2007. The Effects of Magnesium Particles on Posterolateral Spinal Fusion An Experimental in Vivo Study in a Sheep Model. Journal of Neurosurgery Spine
35-) G. Ben-Hamu, D. Eliezer, A.A. Kaya, Y.G. Na and K.S. Shin, Microstructure and corrosion behavior of Mg-Zn-Ag alloys, Materials Science Engineering A, v.435-436, Nov 5, 2006, p.579-587. - 2006
36-) K. Allakhverdiev, T. Baykara, Ş. Ellialtioglu, A. Arslan Kaya, A.M. Kulibekov, S. Onari, Lattice vibrations of pure and doped GaSe, Materials Research Bulletin, 41(2006)751-763. - 2006
37-) K.R. Allakhverdiev, T. Baykara, S. Joosten, E. Günay, A. A. Kaya, A. Kulibekov, A. Seilmeier, E.Y. Salaev, Anisotrophy of two-photon absorption in gallium selenide at 1064nm, Optics Communications, 261(2006)60-64. - 2006
38-) A. Kaya, G. Ben-Hamu, D. Eliezer, K. S. Shin and S. Kohen, ‘Corrosion and oxidation of alloys of the Mg-Y-Zr-REM system’, Metal Science and Heat Treatment, 48, 11 – 12, (2006), 46-50. - 2006
39-) A. Kaya, D. Eliezer, G. Ben-Hamu, O. Golan, Y. G. Na and K. S. Shin, ‘Microstructure and corrosion resistance of alloys of the Mg-Zn-Ag system’, Metal Science and Heat Treatment, 48, 11 – 12, (2006), 50-54. - 2006
40-) Kaya Ali Arslan, Eliezer Dan, Hamu Guy Ben, Golan Oz, Na Yg, Shin Ks, 2006. Microstructure and corrosion resistance of alloys of the Mg Zn Ag system. Metal Science and Heat Treatment
41-) Kaya Ali Arslan, Hamu Guy Ben, Eliezer Dan, Shin Ks, Samir Kohen, 2006. Corrosion and oxidation of alloys of the Mg Y Zr RE system. Metal Science and Heat Treatment
42-) Allahverdi Kerim, Baykara Tarık, Ellialtıoğlu Süleyman Şinasi, Kaya Ali Arslan, Kulibekov A M, 2006. Lattice vibrations of pure and doped GaSe. Materials Research Bulletin
43-) Ben Hamu Guy, Eliezer Dan, Kaya Ali Arslan, Na Yg, Shin Ks, 2006. Microstructure and corrosion behavior of Mg Zn Ag alloys. Materials Science Engineering A
44-) Allakhverdiev Kr, Baykara Tarık, Joosten S, Günay Esin, Kaya Ali Arslan, Kulibekov A, A Seilmeier, Salaev Ey, 2006. Anisotrophy of two photon absorption in gallium selenide at 1064nm. Optics Communications
45-) C. Perez Leon, L. Kador, K.R. Allakhverdiev, T. Baykara and A. A. Kaya, Comparison of the layered semiconductors GaSe, GaS, and GaSe1-xSx by Raman and photolumiscence spectroscopy, Journal of Applied Physics, 98, 013103 (2005). - 2005
46-) K.R. Allakhverdiev, T. Baykara, A. Kulibekov Gulubayov, A. A. Kaya, J. Goldstein, N. Fernelius, S. Hanna and Z. Salaeva, Corrected infrared Sellmeier coefficients for gallium selenide, Journal of Applied Physics, 98, 093515 (2005). - 2005
47-) G. Oktay, O. Duygulu and A. Arslan Kaya, Magnesium Films Deposited on Different Substrates via Arc PVD Method, Materials Science Forum Vols. 546-549 (2007) pp. 519-522. - 2005
48-) Kaya Ali Arslan, Kayalı Eyüp Sabri, Eliezer Dan, 2005. Addition of B4C to AZ91 via Diecasting and Its Effect on Wear Behaviour. Materials Science Forum
49-) Allakhverdiev Kr, Baykara Tarık, Gulubayov Ak, Kaya Ali Arslan, Goldstein J, Fernelius N, Salaeva Z, Hanna S, 2005. Corrected infrared Sellmeier coefficients for gallium selenide. Journal of Applied Physics
50-) Perez Leon C, Kador L, Allakhverdiev Kr, Baykara Tarık, Kaya Ali Arslan, 2005. Comparison of the layered semiconductors GaSe GaS and GaSe1 xSx by Raman and photolumiscence spectroscopy. Journal of Applied Physics
51-) A.A. Kaya, E.S. Kayali, D. Eliezer, Addition of B4C to AZ91 via Diecasting and Its Effect on Wear Behaviour, Magnesium – Science, Technology and Applications, eds. W. Ke, E.H. Han, Y.F. Han, K. Kainer and A.A. Luo, Materials Science Forum, ISBN: 0-87849-968-7, v.488-489, pg. 741-745, 2005. - 2004
52-) M. Pekgüleryüz and A.A. Kaya, Creep Resistant Magnesium Alloys for Powertrain Applications, Advanced Engineering Materials, 5, No.12, pp.866-878. - 2003
53-) Pekgüleryüz Mihriban, Kaya Ali Arslan, 2003. Creep Resistant Magnesium Alloys for Powertrain Applications. Advanced Engineering Materials
54-) Kaya Ali Arslan, 2003. Creep resistant magnesium alloys for powertrain applications. Advanced engineering materials
55-) Weiss Danny, Kaya Ali Arslan, Eli Aghion, Eliezer Dan, 2002. Microstructure and Creep Properties of a Cast Mg-1.7wt Rare Earth 03wt Mn Alloy. Journal of Materials Science
56-) Kaya Ali Arslan, Krauklis Peter, Young David, 2002. Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment I Propagation of a Crack and Oxidation Phenomena. Materials Characterization
57-) Kaya Ali Arslan, 2002. Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment II Carburization and Carbide Transformations. Materials Characterization
58-) A.A. Kaya, P. Krauklis D.J. Young, Microstructure of HK40 Alloy After High Temperature Service in Oxidizing / Carburizing Environment: I- Propagation of a Crack and Oxidation Phenomena. Materials Characterization, 49(2002) 11-21. - 2002
59-) A. A. Kaya, Microstructure of HK40 Alloy After High Temperature Service in Oxidizing / Carburizing Environment: II – Carburization and Carbide Transformations, Materials Characterization, 49(2002) 23-34. - 2002
60-) D. Weiss, A. A. Kaya, E. Aghion, and D. Eliezer, "Microstructure and Creep Properties of a Cast Mg-1.7%wt Rare Earth 03%wt Mn Alloy", Journal of Materials Science, 37(2002) 5371-5379. - 2002
61-) A.A. Kaya, P. Uzan, D. Eliezer, and E. Aghion, An Electron Microscopy Investigation on As-Cast AZ91D Mg-Alloy, J. of Materials Science and Technology, vol.16, p.1001-1011, 2000. - 2000
62-) Kaya Ali Arslan, Pazit Uzan, Dan Eliezer, 2000. Electron microscopical investigation of as cast AZ91D alloy. Materials Science and Technology
63-) Kaya Ali Arslan, Edmonds David, 1998. Non classical Decomposition Products of Austenite in Fe Cr C Alloys. Metallurgical Transactions
64-) A.A. Kaya and D.V. Edmonds, ‘Non-classical Decomposition Products of Austenite in Fe-Cr-C Alloys’. Metallurgical Transactions, v.29A, pp. 2913-2924, December 1998. - 1998
65-) A.A. Kaya, H. Kazdal and A. Tekin, 'Microstrustural Evolution in a Ni-Cr-Co Based Superalloy During Cooling from Melt', Journal of Materials Characterization, 38:1-10 (1997). - 1997
66-) Kaya Ali Arslan, Zeytin Havva Kazdal, Tekin Adnan, 1996. Microstrustural Evolution in a Ni-Cr-Co Based Superalloy During Cooling from Melt. Journal of Materials Characterization

(A-2) SCI veya SCI-Expanded , SSCI, AHCI tarafından taranan dergilerde yayımlanan teknik not, editöre mektup, tartışma, vaka takdimi ve özet türünden yayınlar

1-) Nalçacı Burak, Baysun Meltem, Bahador Abdollah, Umeda Junko, Münstermann Sebastian, Kaya Ali Arslan, Erdoğan Mehmet, 2023. Influence of two-step austempering at different temperatures on mechanical and microstructural properties of AISI 9254 high silicon steel. Ironmaking & Steelmaking

(A-5-Eski) Ulusal hakemli dergilerde yayımlanmış tam makale

1-) H.K. Zeytin, A.A. Kaya, A. Tekin, ‘TEM and SEM Observations on a Cast CrNiCo-Superalloy’, Tr. J. of Medical Sciences Supplement, TÜBİTAK, pg.154-155, 1995. - 1995

(A-8) Ulusal hakemli dergilerde yayımlanmış tam makale

1-) Sevik, S., Kaya, A.A., 1995. S. Sevik and A.A. Kaya, ‘The Production and Microstructures of Superalloys’, Metalurji, v.94, p.53, February, 1995. . Metalürji

(B-1) Uluslararası kongre, sempozyum, panel, çalıştay gibi bilimsel, sanatsal toplantılarda sözlü olarak sunulan ve tam metin olarak yayımlanan bildiri

1-) Guglielmi Pasquale, Piccininni Antonio, Cusanno Angela, Kaya Ali Arslan, Palumbo Gianfranco, 2022. Mechanical and microstructural evaluation of solid-state foamed Ti6Al4V-ELI alloy. V CIRP Conference on Biomanufacturing
2-) Kaya Ali Arslan, 2018. Current status of magnesium alloys: Silk road or other routes?. 7th Annual Global Automotive Lightweight Materials Europe 2018
3-) Guglielmi Pasquale, Kaya Ali Arslan, Sorgente Donato, Palumbo Gianfranco, 2018. Deformation behaviour of a new magnesium ternary alloy. PROCEEDINGS OF THE 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2018
4-) Kurt Zeynep Begüm, Başer Tanya Aycan, Kaya Ali Arslan, 2018. Towards saving some of your fuel. IMMC 2018
5-) Kaya Ali Arslan, Çelik Çisem, Türe Yiğit, Ataman Ali Can, Arkın Erman, Palumbo Giovanni, Donato Sorgente, Turan Dilek, 2017. New Magnesium Alloys with high Elastic Modulus. MTM2017
6-) Kaya Ali Arslan, Çelik Çisem, Türe Yiğit, Ataman Alican, Arkın Erman, Guglielmi Pasquale, Palumbo Gianfranco, Sorgente Donato, Turan Dilek, 2017. Elasticity Modulus and Damping in Some Novel Magnesium Alloys. The 6th International Conference on Magnesium
7-) Ataman Alican, Kaya Ali Arslan, Türe Yiğit, 2017. Effect of Yttrium Addition on Mechanical and Microstructural Properties of Magnesium Alloy Systems. 226th International Academic Conference on Engineering, Technology and Innovations/Amsterdam
8-) Türe Yiğit, Kaya Ali Arslan, Ataman Alican, 2017. Effect of Cerium Addition on Microstructure and Mechanical Properties of Magnesium Alloys. 226th International Academic Conference on Engineering, Technology and Innovations/Amsterdam
9-) Kaya Ali Arslan, Çelik Çisem, Türe Yiğit, Ataman Alican, Arıkan Erman, Guglielmi Pasquale, Palumbo Gıanfranco, Sorgente Donato, Turan Dilek, 2017. Elasticity Modulus and Damping in Some Novel Magnesium Alloys. The 6th International Conference on Magnesium
10-) Kaya Ali Arslan, Çelik Çisem, Türe Yiğit, Ataman Alican, Arkın Erman, Palumbo Gıovannı, Donato Sorgente, Turan Dilek, 2017. New Magnesium Alloys with High Elastic Modulus. MTM2017
11-) Arkın Erman, Ataman Alican, Türe Yiğit, Turan Dilek, Kaya Ali Arslan, 2016. Designing Aircraft Passenger Seat Components Using Magnesium Alloys. IMMC 2016
12-) Palumbo Gıanfranco, Sorgente Donato, Cocozza Antonıo, Eren Dilara, Turan Dilek, Kaya Ali Arslan, 2016. Deformation Behavior of Some Novel Multicomponent Magnesium Alloy Systems. IMMC 2016
13-) Çelik Çisem, Güneş Suna, Sarıkaya Nuriye, Karadayı Pelin, Türe Yiğit, Ataman Alican, Arkın Erman, Yalçın Çağdaş, Palumbo Gıanfranco, Sorgente Donato, Turan Dilek, Kaya Ali Arslan, 2016. Changes in Elasticity Modulus and Damping in Some Novel Magnesium Alloy Systems At Room and High Temperatures. IMMC 2016
14-) Sorgente Donato, Piccininni Antonio, Scintilla L C, Palumbo Gianfranco, Kaya Ali Arslan, Turan Dilek, Bahadır Özlem, Ataman Alican, 2015. Microstructural and texture investigations on the AZ31 alloy subjected to gas forming. IDDRG 2015 Conference
15-) Kaya Ali Arslan, Krauklis Peter, Barbaro Frank, 2015. Retained austenite in heat affected zones of welds in microalloyed steels. 2nd International Iron and Steel Symposium (IISS’15)
16-) Kaya Ali Arslan, 2015. A TEM Investigation on the Effects of Nb and V Addition in HSLA Structural Steels. 2nd International Iron and Steel Symposium (IISS’15)
17-) Duygulu Özgür, Üçüncüoğlu Selda, Oktay Gizem, Yücel Onuralp, Kaya Ali Arslan, 2010. Effect of aging and thermomechanical processes in twin roll cast Mg AZ91 alloy sheet. Magnesium Technology 2010
18-) Kaya Ali Arslan, R Alper Kaya, Beckmann F, Willbold E, Witte Frank, 2010. In vivo corrosion of AZ31 magnesium screws in a sheep model. 2nd Symposium on Biodegradable Metals
19-) Kaya Ali Arslan, Yücel Onuralp, Beckmann F, Willbold E, Witte Frank, 2010. Permanent Implants with Magnesium Surface. 4th International Conference on Biomaterials “Biomaterials & Medical Devices” BiomMedD’2010
20-) A. A. Kaya, O. Yucel, F. Beckmann, E. Willbold, F. Witte, Permanent Implants with Magnesium Surface, 4th International Conference on Biomaterials “Biomaterials & Medical Devices” BiomMedD’2010, 23-25th September, 2010, Sinaia, Romania. - 2010
21-) A. A. Kaya, R. A. Kaya, F. Beckmann, E. Willbold, F. Witte, In vivo corrosion of AZ31 magnesium screws in a sheep model, 2nd Symposium on Biodegradable Metals, Matarea, Italy, 31st August-3rd September 2010. - 2010
22-) O. Duygulu, S. Ucuncuoglu, G. Oktay, O. Yucel and A. Arslan Kaya, Effect of aging and thermomechanical processes in twin roll cast Mg AZ91 alloy sheet, Magnesium Technology 2010, Edited by Sean R. Agnew, Eric A. Nyberg, Wim Sillekens and Neale R. Neelameggham,TMS (The Minerals, Metals & Materials Society), 2010. - 2010
23-) O. Duygulu, S. Ucuncuoglu, G. Oktay, D.S. Temur, O. Yucel and A. Arslan Kaya, Development of 1500mm Wide Wrought Magnesium Alloys By Twin Roll Casting Technique in Turkey, Magnesium Technology 2009, Edited by Eric A. Nyberg, Sean R. Agnew, Neale R. Neelameggham and Mihriban O. Pekguleryuz, TMS (The Minerals, Metals & Materials Society), 2009. - 2009
24-) O. Duygulu, S. Ucuncuoglu, G. Oktay, D. Temur, O. Yucel, A. Arslan Kaya, Development of Rolling Technology for Wrought Magnesium Alloys Produced by Twin Roll Strip Casting Technique in Turkey, Eds. Eric Nyberg, Sean Agnew, Neale Neelameggham, Mihriban Pekguleryuz, Magnesium Technology, TMS Annual Meeting & Exhibition, 2009, USA. - 2009
25-) Duygulu Özgür, Üçüncüoğlu Selda, Oktay Gizem, Temur Deniz Sultan, Yücel Onuralp, Kaya Ali Arslan, 2009. Development of rolling technology for twin roll cast 1500mm wide magnesium AZ31 alloy. Magnesium Technology 2009
26-) A.A. Kaya, Ö. Duygulu, G. Oktay, S. Üçüncüoglu, D. S. Temur, O. Yücel, Production of 150cm wide MgAZ31 Sheet by Twin Roll Strip Casting, International Materials Research Conference (IMRC 2008), Chongqing, China, June 9 - 12, 2008. - 2008
27-) Kaya Ali Arslan, Duygulu Özgür, Oktay Gizem, Üçüncüoğlu Selda, Temur Deniz Sultan, Yücel Onuralp, 2008. Production of 150cm wide MgAZ31 Sheet by Twin Roll Strip Casting. International Materials Research Conference (IMRC 2008)
28-) Temur Deniz Sultan, Kaya Ali Arslan, Kaya Gürler, Kurtuluş Murat, 2007. Low Thermal Expansion Coefficient Fe Ni Co Alloys Plastic Deformation Alloy Composition and Martensitic Transformation Relationships. Proceeding of Int. Congress, Advanced Metallic Composites and Alloys for High Performance Applications, TMS
29-) Kaya Ali Arslan, Üçüncüoğlu Selda, Allahverdi Kerim, 2007. Evaluation of TiN Coatings Produced via Different Techniques. Proceeding of Int. Congress, Innovation in Titanium Technology, Eds. M.N. Gungor, M. Ashraf Imam, F.H. (Sam) Froes, TMS
30-) Kaya Ali Arslan, Kaya R Alper, Wıtte Frank, Duygulu Özgür, 2007. Useful Corrosion Potential of Magnesium Alloys as Implants. International Corrosion Engineering Conference
31-) Kaya Ali Arslan, Temur D Sultan, Üçüncüoğlu Selda, 2007. Three Corrosion Case Studies Why should a drive chain get longer Where did this chlorine come from Why did cookies got wet. The Third (Israel) International Conference
32-) Kaya Ali Arslan, Duygulu Özgür, Üçüncüoğlu Selda, Oktay G, Yücel Onuralp, 2007. Diffusion Bonding of Magnesium with Magnesium Titanium and Zirconium Alloys. Int. Conf., Magnesium-Broad Horizons
33-) Üçüncüoğlu Selda, Duygulu Özgür, Kaya Ali Arslan, 2007. Farklı Koşullarda oluşturulmuş Titanyum Sert alfa Fazının Karakterizasyonu. 18nci Ulusal (Uluslar Arası Katılımlı) Elektron Mikroskopi Kongresi
34-) Temur D Sultan, Engin E Doruk, Uçankuş N Lortlar, Kaya Ali Arslan, 2007. Bacteria attachement on surfaces magnesium alloys. 18th National Electron Microscopy Congress
35-) Kaya Ali Arslan, 2007. Future of Magnesium Applications in Transportation and Bone Surgery. 10th Int. Symposium on Advanced Materials (ISAM-2007)
36-) D. Sultan Temur, A. Arslan Kaya, G. Kaya, M.Kurtuluş, Low Thermal Expansion Coefficient Fe-Ni-Co Alloys-Plastic Deformation, Alloy Composition and Martensitic Transformation Relationships, Proceeding of Int. Congress, Advanced Metallic Composites and Alloys for High Performance Applications, Eds. A. Pandey, K.L. Kendig and J. Lewandowski, TMS, Orlando, Florida, USA, pg.55-61, February 2007. - 2007
37-) A. Arslan Kaya, S. Üçüncüoğlu and Kerim Allahverdi, Evaluation of TiN Coatings Produced via Different Techniques, Proceeding of Int. Congress, Innovation in Titanium Technology, Eds. M.N. Gungor, M. Ashraf Imam, F.H. (Sam) Froes, TMS, Orlando, Florida, USA, pg.245-251, April 2007. - 2007
38-) A. Arslan Kaya, R. Alper Kaya, Frank Witte and Ozgur Duygulu, Useful Corrosion?- Potential of Magnesium Alloys as Implants, International Corrosion Engineering Conference, Seoul, Korea, May 20-24, 2007. - 2007
39-) A. A. Kaya, Key Note Speaker: Future of Magnesium: Applications in Transportation and Bone Surgery, 10th Int. Symposium on Advanced Materials (ISAM-2007), Islamabad, Pakistan, September 3-7, 2007. - 2007
40-) A. Arslan Kaya, N. Kurkcu, S. Üçüncüoğlu, A. Kandemir, H. Arslan, Production of UT Calibration Blocks Containing Artificially Introduced Defects, The 33rd Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Portland, Oregon, July 30-August 4, 2006. - 2006
41-) Kaya Ali Arslan, Kürkçü N, Üçüncüoğlu Selda, Kandemir A, Arslan H, 2006. Production of UT Calibration Blocks Containing Artificially Introduced Defects. The 33rd Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE)
42-) Üçüncüoğlu Selda, Kaya Ali Arslan, Kürkçü N, Kandemir A, Arslan H, Berk C, F Ç Şahin, 2006. Formation of hard alpha phase in titanium and production of ultrasonic inspection blocks from Ti6Al4V alloy involving hard alpha. 13th International Metallurgy and materials Congress
43-) Duygulu Özgür, Oktay G, Berk C, Kaya Ali Arslan, 2006. Diffusion Bonding of Ti 6Al 4V Alloy and Zirconium as Implant Material. 16th International Microscopy Conference
44-) Oktay G, Duygulu Özgür, Berk C, Kaya Ali Arslan, 2006. Magnesium Films Deposited on Different Substrates Using Arc PVD Method. 16th International Microscopy Conference
45-) Ben Hamu G, Elıezer D, Kaya Ali Arslan, 2006. The Relation between Microstructure and Corrosion Behavior of Magnesium Alloys for High Temperature Applications. The 12th Israel Materials Engineering Conference
46-) Duygulu Özgür, Kaya R Alper, Oktay G, Berk C, Kaya Ali Arslan, 2006. Can Magnesium Alloys be Used as Implants SEM Examinations from an in vivo Study. 16th International Microscopy Conference
47-) Oktay G, Duygulu Özgür, Kaya Ali Arslan, 2006. Magnesium Films Deposited on Different Substrates Via Arc PVD Method. 2nd Internatıonal Conference on Magnesium (ICM 2006)
48-) Duygulu Özgür, Kaya R Alper, Oktay G, Kaya Ali Arslan, 2006. Investigation on The Potential of Magnesium Alloy AZ31 as a Bone Implant. 2nd International Conference on Magnesium (ICM 2006)
49-) Kaya Ali Arslan, Duygulu Özgür, Yücel Onuralp, Elıezer D, 2006. Effect of Grain Sıze on Necklace Formation in Magnesium Alloys. 2nd Internatıonal Conference on Magnesıum (ICM 2006)
50-) Kaya Ali Arslan, 2005. How and Why Metals Bond Together. Second Israel Conference
51-) Kaya Ali Arslan, Ben Hamu G, Elıezer D, Shın K S, Cohen S, 2005. Corrosion and Oxidation of Mg Y Re Zr Alloys. Int. Conf., ‘Magnesium-Broad Horizons’
52-) Kaya Ali Arslan, Elıezer D, Ben Hamu G, Golan O, Na Y G, Shın K S, 2005. Microstructure and Corrosion Behavior of Mg Zn Ag Alloys. Int. Conf., 'Magnesium-Broad Horizons'
53-) Kaya Ali Arslan, Kayal E S, Elıezer D, Gertsberg G, Moscovitch N, 2004. Sliding wear behaviour of particle reinforced magnesium alloy AZ91. Int. Conf. on Magnesium
54-) Kaya Ali Arslan, Yücel Onuralp, Elıezer D, Aghıon E, 2003. An Electron Microscopy Investigation on As cast AZ91D Alloy Modified with Nitrogen. 6th International Conf. And Exhibition on Magnesium Alloys and their Applications
55-) Pekgüleryüz Mihriban, Kaya Ali Arslan, 2003. Creep Resistant Magnesium Alloys for Powertrain Applications. 6th International Conf. And Exhibition on Magnesium Alloys and their Applications
56-) Kaya Ali Arslan, 2002. A Skid Rail Cast Alloy with Improved High Temperature Performance. Conf. Proceed. IMEC 10
57-) Özdoğru E F, Kaya Ali Arslan, Kayalı E, 2002. Oxidation and carburization behavior of a superalloy at high temperatures. 11th International Metallurgy and Materials Congress
58-) Kaya Ali Arslan, Şahin F Ç, Abanoz D, Addemir O, 2002. Surface oxidation carbide transformations and microstructural changes in a high temperature alloy. 11th International Metallurgy and Materials Congress
59-) Kaya Ali Arslan, Krauklis P, Young D J, 2000. Microstructural changes and oxidation phenomena on the surfaces of two heat resistant alloys during high temperature service. the 10th International Metallurgy and Materials Congress
60-) Kaya Ali Arslan, Sevik S, Uzan P, Elıezer D, Aghion E, 2000. Microstructure of As Cast AZ91D Alloy. the 10th International Metallurgy and Materials Congress
61-) Mıller D, Kaya Ali Arslan, Krauklis P, Smith M, 1998. An approach to solve an industrial problem involving precipitation of intermetallics in duplex steels. Materials-98 Conference
62-) Kaya Ali Arslan, Krauklis P, Barbaro F, 1998. Post weld reheating effects in high strength low alloy structural steels. Materials 98 Conference
63-) Krauklis P, Kaya Ali Arslan, Stokoe P, Jessop B, 1998. Effect of composition and cooling rate on the microstructure of vanadium microalloyed medium carbon forging steel. Materials-98 Conference
64-) Mehta S, Kaya Ali Arslan, Krauklis P, Gleeson B, 1998. Effect of boron addition on the strain aging behaviour of low carbon steel wires. Materials-98 Conference
65-) Kaya Ali Arslan, Krauklis P, 1998. Phenomena on the surface and along a crack path in a heat resistant alloy during high temperature service. The 3rd Pacific Rim International Conference on Advance Materials and Processing
66-) A.A. Kaya, P. Krauklis and F. Barbaro, 'Post-weld reheating effects in high strength low-alloy structural steels', Materials 98 Conference, University of Wollongong, Australia, June-1998. - 1998
67-) D. Miller, A.A. Kaya, P. Krauklis and M. Smith, 'An approach to solve an industrial problem involving precipitation of intermetallics in duplex steels', Materials-98 Conference, University of Wollongong, Australia, June-1998. - 1998
68-) P. Krauklis, A.A. Kaya, P. Stokoe and B. Jessop, 'Effect of composition and cooling rate on the microstructure of vanadium microalloyed medium-carbon forging steel' Materials-98 Conference, University of Wollongong, Australia, June-1998. - 1998
69-) S. Mehta, A.A. Kaya, P. Krauklis and B. Gleeson, 'Effect of boron addition on the strain aging behaviour of low carbon steel wires', Materials-98 Conference, University of Wollongong, Australia, June-1998. - 1998
70-) A.A. Kaya, S. Sevik, 'Microscopical Characterization of a High Temperature Material Exposed to Carburizing/Oxidising Environments, NATO ASI on 'Mechanical Behaviour of Materials At High Temperature', Sesimbra-Portugal, September 12th-22nd, 1995. - 1995
71-) A.A. Kaya and D.V. Edmonds, 'Observations on Acicular Structures in an Fe-10Cr-0.4C Alloy', 12th International Congress on Electron Microscopy, Seattle, USA, August, 1990. - 1990

(B-2) Uluslararası kongre, sempozyum, panel, çalıştay gibi bilimsel, sanatsal toplantılarda sözlü olarak sunulan ve özet metin olarak yayımlanan bildiri.

1-) D. Sultan Temur, E. Doruk Engin, N.Lortlar Uçankuş ve A. Arslan Kaya, ‘Bacteria attachement on surfaces magnesium alloys’, 18th National Electron Microscopy Congress, Eskişehir, Turkey, 26-29 August 2007. - 2007
2-) A. Arslan Kaya, O. Duygulu, S. Ucuncuoglu, G. Oktay and O. Yucel, Diffusion Bonding of Magnesium with Magnesium, Titanium and Zirconium Alloys, Int. Conf., Magnesium-Broad Horizons, St. Petersburg, 5-8 June, 2007. - 2007
3-) O. Duygulu, R. Alper Kaya, G. Oktay, C. Berk and A. Arslan Kaya, Can Magnesium Alloys be Used as Implants?-SEM Examinations from an in vivo Study, 16th International Microscopy Conference, Sopporo, Japan, September 2006. - 2006
4-) G. Oktay, O. Duygulu and A. Arslan Kaya, Magnesium Films Deposited on Different Substrates Via Arc PVD Method, 2nd Internatıonal Conference on Magnesium (ICM 2006), 2006BIMW, Beijing, China, June 25-30th, 2006. - 2006
5-) O. Duygulu, R. Alper Kaya, G. Oktay and A. Arslan Kaya, Investigation on The Potential of Magnesium Alloy AZ31 as a Bone Implant, 2nd International Conference on Magnesium (ICM 2006), 2006BIMW, Beijing, China, June 25-30th, 2006. - 2006
6-) A.A. Kaya, O. Duygulu, O. Yucel and D. Eliezer, Effect of Grain Sıze on Necklace Formation in Magnesium Alloys, 2nd Internatıonal Conference on Magnesıum (ICM 2006), 2006BIMW, Beijing, China, June 25-30th, 2006. - 2006
7-) O. Duygulu, G. Oktay, C. Berk and A. Arslan Kaya, Diffusion Bonding of Ti-6Al-4V Alloy and Zirconium as Implant Material, 16th International Microscopy Conference, Sopporo, Japan, September 2006. - 2006
8-) O. Duygulu, R. Alper Kaya, G. Oktay, C. Berk and A. Arslan Kaya, Can Magnesium Alloys be Used as Implants?-SEM Examinations from an in vivo Study, 16th International Microscopy Conference, Sopporo, Japan, September 2006. - 2006
9-) O. Duygulu, G. Oktay, C. Berk and A. Arslan Kaya, Diffusion Bonding of Ti-6Al-4V Alloy and Zirconium as Implant Material, 16th International Microscopy Conference, Sopporo, Japan, September 2006. - 2006
10-) G. Oktay, O. Duygulu, C. Berk and A. Arslan Kaya, Magnesium Films Deposited on Different Substrates Using Arc PVD Method, 16th International Microscopy Conference, Sopporo, Japan, September 2006. - 2006
11-) S. Üçüncüoğlu , A. Arslan Kaya, N. Kürkçü, A. Kandemir, H. Arslan, C. Berk, ve F. Ç. Şahin, ‘Formation of hard alpha phase in titanium and production of ultrasonic inspection blocks from Ti6Al4V alloy involving hard alpha’, 13th International Metallurgy and materials Congress, Istanbul, Turkey, September 2006. - 2006
12-) G. Ben-Hamu, D. Eliezer and A. A. Kaya, "The Relation between Microstructure and Corrosion Behavior of Magnesium Alloys for High Temperature Applications", The 12th Israel Materials Engineering Conference, Beer-Sheva, Israel, March 1th -2th (2006). - 2006
13-) A.A. Kaya, G. Ben-Hamu, D. Eliezer, K. S. Shin and S. Cohen, Corrosion and Oxidation of Mg-Y-RE-Zr Alloys, Int. Conf., 'Magnesium-Broad Horizons', Moscow, 29th Nov-1st Dec. 2005. - 2005
14-) A. A. Kaya, D. Eliezer, G. Ben-Hamu, O. Golan, Y.G. Na and K.S. Shin, Microstructure and Corrosion Behavior of Mg-Zn-Ag Alloys, Int. Conf., 'Magnesium-Broad Horizons', Moscow, 29th Nov-1st Dec. 2005. - 2005
15-) A.A. Kaya, How and Why Metals Bond Together, CAMPI (Corrosion, Advance Materials&Processes in Industry) The Second Israel Conference, Beer-Sheva, 1st-2nd June, 2005. - 2005
16-) A.A. Kaya, G. Ben-Hamu, D. Eliezer, K. S. Shin and S. Cohen, Corrosion and Oxidation of Mg-Y-Re-Zr Alloys, Int. Conf., ‘Magnesium-Broad Horizons’, Moscow, 29th Nov-1st Dec. 2005. - 2005
17-) A. A. Kaya, E. S. Kayal, D. Eliezer, G. Gertsberg, N. Moscovitch, Sliding wear behaviour of particle reinforced magnesium alloy AZ91, Int. Conf. on Magnesium, Beijing, China, 20-24 September, 2004. - 2004
18-) Mihriban Pekgüleryüz and A.A. Kaya, Creep Resistant Magnesium Alloys for Powertrain Applications, 6th International Conf. And Exhibition on Magnesium Alloys and their Applications, DGM, Wolfsburg, Germany, 18-20 Nov., 2003. - 2003
19-) A. A. Kaya, O. Yücel, D. Eliezer, E. Aghion, An Electron Microscopy Investigation on As-cast AZ91D Alloy Modified with Nitrogen, 6th International Conf. And Exhibition on Magnesium Alloys and their Applications, DGM, Wolfsburg, Germany, 18-20 Nov., 2003. - 2003
20-) T. A. Başer, Y. Birol, S. Üçüncüoğlu ve A. Arslan Kaya, ‘Ageing behaviour of AA6063 aluminum alloy’, 16th National Electron Microscopy Congress, 2-5 September 2003, İzmir, Turkey. - 2003
21-) A.A. Kaya, A Skid-Rail Cast Alloy with Improved High Temperature Performance, Conf. Proceed. IMEC 10, Dead Sea, Israel, 5-7 February 2002. - 2002
22-) A.A. Kaya, F.Ç. Şahin, D. Abanoz and O. Addemir, 'Surface oxidation, carbide transformations and microstructural changes in a high temperature alloy', 11th International Metallurgy and Materials Congress, 5-8 June 2002, Istanbul. - 2002
23-) E.F. Ozdoğru, A.A. Kaya and E. Kayalı, 'Oxidation and carburization behavior of a superalloy at high temperatures', 11th International Metallurgy and Materials Congress, 5-8 June 2002, Istanbul. - 2002
24-) A.A. Kaya, P. Krauklis and D.J. Young, Microstructural changes and oxidation phenomena on the surfaces of two heat resistant alloys during high temperature service, the 10th International Metallurgy and Materials Congress, Istanbul, 24-28 May 2000. - 2000
25-) A.A. Kaya, S. Sevik, P. Uzan, D. Eliezer, and E. Aghion, Microstructure of As-Cast AZ91D Alloy, the 10th International Metallurgy and Materials Congress, Istanbul, 24-28 May 2000. - 2000
26-) A.A. Kaya and P. Krauklis, 'Phenomena on the surface and along a crack path in a heat resistant alloy during high temperature service', The 3rd Pacific Rim International Conference on Advance Materials and Processing, Honolulu-Hawaii, July 12-16, 1998. - 1998
27-) A.A. Kaya and H. Kazdal, 'Effects of Silicon Addition on the Microstructural Evolution in a Ni-Cr-Co Based Superalloy During Cooling From Melt', 8th. International Congress on Metallurgy and Materials, Istanbul, June, 1995. - 1995
28-) R. Samur, S. Salman, A.A. Kaya, 'Observation on the Bond Strength of Ceramic Coatings', 8th International Congress on Metallurgy and Materials, Istanbul, June, 1995. - 1995
29-) A.A. Kaya and S. Sevik, 'The Microstructural Changes in the High Temperature Superalloy Tubes During High Temperature Service', 8th. International Congress on Metallurgy and Materials, Istanbul, June, 1995. - 1995
30-) D.V. Edmonds and A.A. Kaya, 'Observations on a Non-Classical Decomposition Product of Austenite in Fe-C-Cr Alloys', International Conference on Solid-Solid Phase Transformations in Inorganic Materials, Pittsburgh, USA, July-1994. - 1994
31-) S. Salman, A.A. Kaya, and R. Samur, 'A Comparison of Al2O3-TiO2 and Cr2O3-SiO2-TiO2 Plasma Sprayed Ceramic Coatings', 2nd. International Congress on Ceramics, Istanbul, Turkey, October, 1994. - 1994
32-) A.A. Kaya and D.V. Edmonds, 'An Unusual Acicular Structure in an Fe-3.5Cr-0.4C Alloy', 10th European Congress on Electron Microscopy, Granada-Spain, September, 1992. - 1992

(B-4) Ulusal kongre, sempozyum, panel, çalıştay gibi bilimsel, sanatsal toplantılarda sözlü olarak sunulan ve tam metin olarak yayımlanan bildiri

1-) Kaya Ali Arslan, 2009. Kaybolan Metalik Implantlara İhtiyaç Duyarsak Magnezyum Alaşımlarının Başarı Şansı. 2. Yapay Organlar ve Destek Sistemleri Kongresi – TUYOD 2009
2-) Duygulu Özgür, Oktay G, Kaya Ali Arslan, 2006. Use of magnesium alloys in automotive industry. Congress on Automotive Technologies
3-) Başer T A, Birol Y, Üçüncüoğlu Selda, Kaya Ali Arslan, 2003. Ageing behaviour of AA6063 aluminum alloy. 16th National Electron Microscopy Congress
4-) Özdoğru E F, Abanoz D, Kaya Ali Arslan, 2001. Microstructural Observations on a Turbine Blade After Exposure to Excessively High Temperatures. 15th National Electron Microscopy Congress
5-) Abanoz D, Özdoğru E F, Kaya Ali Arslan, 2001. Crack propagation in a high temperature alloy during service. 15th National Electron Microscopy Congress

(B-5) Ulusal kongre, sempozyum, panel, çalıştay gibi bilimsel, sanatsal toplantılarda sözlü sunulan ve özet metin olarak yayımlanan bildiri.

1-) A.A. Kaya, F. Witte, ‘Kaybolan Metalik Implantlara İhtiyaç Duyarsak? - Magnezyum Alaşımlarının Başarı Şansı’, 2. Yapay Organlar ve Destek Sistemleri Kongresi – TUYOD 2009, 23-26 Nisan 2009, Antalya. - 2009
2-) A. Arslan Kaya, D. Sultan Temur, S. Üçüncüoğlu, Three Corrosion Case Studies: Why should a drive chain get longer? Where did this chlorine come from? Is your cookie wet?, Abstracts Book, CAMPI (Corrosion, Advance Materials&Processes in Industry) The Third (Israel) International Conference, Beer-Sheva, 29th-31st May, 2007. - 2007
3-) S. Üçüncüoğlu, Ö.Duygulu, A. Arslan Kaya, Farklı Koşullarda oluşturulmuş Titanyum Sert-alfa Fazının Karakterizasyonu, 18nci Ulusal (Uluslar Arası Katılımlı) Elektron Mikroskopi Kongresi, Bildiri Özetleri Kitabı, Eskişehir, 26-29 Agustos 2007. - 2007
4-) Ö. Duygulu, G. Oktay, A. Arslan Kaya, ‘Use of magnesium alloys in automotive industry’, OTEKON-06, Congress on Automotive Technologies, 26-28 Haziran 2006, Bursa, Turkey. - 2006
5-) E. F. Özdoğru, D. Abanoz and A.A. Kaya, Microstructural Observations on a Turbine Blade After Exposure to Excessively High Temperatures, 15th National Electron Microscopy Congress, Kusadası, Izmir, 16-18 September 2001. - 2001
6-) D. Abanoz, E. F. Özdoğru ve A.A. Kaya, Crack propagation in a high temperature alloy during service, 15th National Electron Microscopy Congress, Kusadasi, Izmir, 16-18 September 2001. - 2001
7-) A.A. Kaya and R. Samur, 'The Microcracks in the Plasma Sprayed Ceramic Coatings and Their Effects on the Properties', 6th. Denizli Congress on Materials, Denizli, Turkey, April, 1995. - 1995
8-) A.A. Kaya and R. Samur, 'The Microcracks in the Plasma Sprayed Ceramic Coatings and Their Effects on the Properties', 6th. Denizli Congress on Materials, Denizli, Turkey, April, 1995. - 1995
9-) A.A. Kaya, S. Salman and R. Samur, 'The Effects of the Spray Atmosphere on Some Thermal Coating Powders', Bursa Symposium on Combustion Processes, Bursa, Turkey, June, 1995. - 1995
10-) A.A. Kaya and S. Kayali, 'Stress Relaxation in Prestressed Concrete Steels', 4th National Congress on Metallurgy, MTA, Ankara, Turkey, 1986. - 1986

(C-3) Alanında tanınmış uluslararası yayınevlerince yayımlanan kitaplarda bölüm yazarlığı

1-) A. Arslan KAYA, Physical Metallurgy of Magnesium Alloys, in ‘‘Fundamentals of Magnesium Alloy Metallurgy’, Editors: Prof. Mihriban O. Pekguleryuz, Prof. Karl Kainer, Prof. A. Arslan Kaya, pp.33-84 , Woodhead Publishing, Cambridge, England, 2013. ISBN: 978-0-85709-088-1 - 2013
2-) Kaya Ali Arslan, 2013. Fundamentals of Magnesium Alloy Metallurgy. Yayın Evi: Woodhead Publishing Editör Adı: Pekguleryuz M. O.; Kainer K.; Kaya A. Arslan
3-) Kaya Ali Arslan, 2005. High Temperature Deformation Alloys and Processing of Magnesium. Yayın Evi: Woodhead Publishing Editör Adı: Z. Xiao Guo
4-) A. Arslan KAYA, M. Pekgüleryüz and D. Eliezer, High Temperature Deformation, Alloys and Processing of Magnesium, Chapter 2 in ‘Deformation and Processing of Structural Materials’, ed. Z. Xiao Guo, Woodhead Publishing, Cambridge, England, 2005. ISBN 0-8493-2578-1 - 2005

(D-1) SCI veya SCI-Expanded, SSCI ve AHCI tarafından taranan dergilerde baş editörlük

1-) Editörlük Türü: Kitap. 2013. Fundamentals of Magnesium Alloy Metallurgy.

(E-1) SCI veya SCI-Expanded, SSCI ve AHCI tarafından taranan dergilerde olmak üzere adayın yazar olarak yer almadığı SCI veya SCI-Expanded, SSCI ve AHCI tarafından taranan yayınlarda adayın eserlerine yapılan atıf.

1-) Lattice vibrations of pure and doped GaSe - Atıf Yılı: 2023 Atıf Sayısı: 4
2-) Effect of Manganese on the Creep Behavior of Magnesium and the role of Mn Precipitation during Creep - Atıf Yılı: 2023 Atıf Sayısı: 10
3-) The influence of nitridation time on the structural properties of GaN grown on Si 111 substrate - Atıf Yılı: 2023 Atıf Sayısı: 3
4-) Microstructural Investigation and the Creep Behavior of Mg Sr Mn Alloys - Atıf Yılı: 2023 Atıf Sayısı: 6
5-) Effect of Manganese on the Creep Behavior of Magnesium and the role of alpha Mn Precipitation during Creep - Atıf Yılı: 2023 Atıf Sayısı: 6
6-) Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant - Atıf Yılı: 2023 Atıf Sayısı: 2
7-) Electron microscopical investigation of as cast AZ91D alloy - Atıf Yılı: 2023 Atıf Sayısı: 2
8-) Anisotrophy of two photon absorption in gallium selenide at 1064nm - Atıf Yılı: 2023 Atıf Sayısı: 2
9-) Microstructure and Creep Properties of a Cast Mg-1.7wt Rare Earth 03wt Mn Alloy - Atıf Yılı: 2023 Atıf Sayısı: 1
10-) Corrosion and oxidation of alloys of the Mg Y Zr RE system - Atıf Yılı: 2023 Atıf Sayısı: 3
11-) Creep Resistant Magnesium Alloys for Powertrain Applications - Atıf Yılı: 2023 Atıf Sayısı: 15
12-) Creep resistant magnesium alloys for powertrain applications - Atıf Yılı: 2023 Atıf Sayısı: 24
13-) Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site - Atıf Yılı: 2023 Atıf Sayısı: 2
14-) The Effects of Magnesium Particles on Posterolateral Spinal Fusion An Experimental in Vivo Study in a Sheep Model - Atıf Yılı: 2023 Atıf Sayısı: 3
15-) Production of 150 cm wide AZ31 magnesium sheet by twin roll casting - Atıf Yılı: 2023 Atıf Sayısı: 1
16-) Corrected infrared Sellmeier coefficients for gallium selenide - Atıf Yılı: 2023 Atıf Sayısı: 3
17-) Microstructure and corrosion resistance of alloys of the Mg Zn Ag system - Atıf Yılı: 2023 Atıf Sayısı: 1
18-) Influence of two-step austempering at different temperatures on mechanical and microstructural properties of AISI 9254 high silicon steel - Atıf Yılı: 2023 Atıf Sayısı: 1
19-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment II Carburization and Carbide Transformations - Atıf Yılı: 2023 Atıf Sayısı: 3
20-) Microstructure and corrosion behavior of Mg Zn Ag alloys - Atıf Yılı: 2023 Atıf Sayısı: 2
21-) Comparison of the layered semiconductors GaSe GaS and GaSe1 xSx by Raman and photolumiscence spectroscopy - Atıf Yılı: 2023 Atıf Sayısı: 1
22-) Effects of Manganese on the Microstructure and Dynamic Precipitation in Creep Resistant Cast Mg Ce Mn alloys - Atıf Yılı: 2023 Atıf Sayısı: 3
23-) Advanced production and properties of die cast magnesium composites based on AZ91 and SiC - Atıf Yılı: 2023 Atıf Sayısı: 3
24-) Microstructural Investigation and the Creep Behavior of Mg-Sr-Mn Alloys - Atıf Yılı: 2023 Atıf Sayısı: 3
25-) Creep Resistant Magnesium Alloys for Powertrain Applications - Atıf Yılı: 2022 Atıf Sayısı: 15
26-) Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site - Atıf Yılı: 2022 Atıf Sayısı: 7
27-) Microstructure and corrosion behavior of Mg Zn Ag alloys - Atıf Yılı: 2022 Atıf Sayısı: 5
28-) Effect of Manganese on the Creep Behavior of Magnesium and the role of alpha Mn Precipitation during Creep - Atıf Yılı: 2022 Atıf Sayısı: 7
29-) Creep Resistant Magnesium Alloys for Powertrain Applications - Atıf Yılı: 2021 Atıf Sayısı: 10
30-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment II Carburization and Carbide Transformations - Atıf Yılı: 2021 Atıf Sayısı: 4
31-) Electron microscopical investigation of as cast AZ91D alloy - Atıf Yılı: 2021 Atıf Sayısı: 4
32-) Production of 150 cm wide AZ31 magnesium sheet by twin roll casting - Atıf Yılı: 2021 Atıf Sayısı: 1
33-) Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site - Atıf Yılı: 2021 Atıf Sayısı: 6
34-) Microstructure and corrosion behavior of Mg Zn Ag alloys - Atıf Yılı: 2021 Atıf Sayısı: 6
35-) Effects of Manganese on the Microstructure and Dynamic Precipitation in Creep Resistant Cast Mg Ce Mn alloys - Atıf Yılı: 2021 Atıf Sayısı: 3
36-) Creep resistant magnesium alloys for powertrain applications - Atıf Yılı: 2021 Atıf Sayısı: 2
37-) Effect of Manganese on the Creep Behavior of Magnesium and the role of Mn Precipitation during Creep - Atıf Yılı: 2021 Atıf Sayısı: 1
38-) Microstructure and Creep Properties of a Cast Mg-1.7wt Rare Earth 03wt Mn Alloy - Atıf Yılı: 2021 Atıf Sayısı: 1
39-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment I Propagation of a Crack and Oxidation Phenomena - Atıf Yılı: 2021 Atıf Sayısı: 5
40-) The influence of nitridation time on the structural properties of GaN grown on Si 111 substrate - Atıf Yılı: 2021 Atıf Sayısı: 1
41-) Creep Resistant Magnesium Alloys for Powertrain Applications - Atıf Yılı: 2020 Atıf Sayısı: 24
42-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment II Carburization and Carbide Transformations - Atıf Yılı: 2020 Atıf Sayısı: 5
43-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment I Propagation of a Crack and Oxidation Phenomena - Atıf Yılı: 2020 Atıf Sayısı: 9
44-) New Magnesium Alloys with high Elastic Modulus - Atıf Yılı: 2019 Atıf Sayısı: 1
45-) Non classical Decomposition Products of Austenite in Fe Cr C Alloys - Atıf Yılı: 2019 Atıf Sayısı: 1
46-) Diffusion Bonding of Magnesium Zirconium and Titanium as Implant Material - Atıf Yılı: 2019 Atıf Sayısı: 1
47-) Creep Resistant Magnesium Alloys for Powertrain Applications - Atıf Yılı: 2019 Atıf Sayısı: 21
48-) Effect of Manganese on the Creep Behavior of Magnesium and the role of Mn Precipitation during Creep - Atıf Yılı: 2019 Atıf Sayısı: 5
49-) Microstructure and Creep Properties of a Cast Mg-1.7wt Rare Earth 03wt Mn Alloy - Atıf Yılı: 2019 Atıf Sayısı: 1
50-) Evolution of Microstructure and Texture in AZ31 Alloy Subjected to Gas Forming - Atıf Yılı: 2019 Atıf Sayısı: 1
51-) Corrosion and oxidation of alloys of the Mg Y Zr RE system - Atıf Yılı: 2019 Atıf Sayısı: 1
52-) Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site - Atıf Yılı: 2019 Atıf Sayısı: 9
53-) Lattice vibrations of pure and doped GaSe - Atıf Yılı: 2019 Atıf Sayısı: 4
54-) The Effects of Magnesium Particles on Posterolateral Spinal Fusion An Experimental in Vivo Study in a Sheep Model - Atıf Yılı: 2019 Atıf Sayısı: 2
55-) Anisotrophy of two photon absorption in gallium selenide at 1064nm - Atıf Yılı: 2019 Atıf Sayısı: 1
56-) Effects of Manganese on the Microstructure and Dynamic Precipitation in Creep Resistant Cast Mg Ce Mn alloys - Atıf Yılı: 2019 Atıf Sayısı: 4
57-) Effect of Grain Size on Necklace Formation of Magnesium Alloys - Atıf Yılı: 2019 Atıf Sayısı: 1
58-) Deformation behaviour of a new magnesium ternary alloy - Atıf Yılı: 2019 Atıf Sayısı: 1
59-) Addition of B4C to AZ91 via Diecasting and Its Effect on Wear Behaviour - Atıf Yılı: 2019 Atıf Sayısı: 2
60-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment I Propagation of a Crack and Oxidation Phenomena - Atıf Yılı: 2019 Atıf Sayısı: 8
61-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment II Carburization and Carbide Transformations - Atıf Yılı: 2019 Atıf Sayısı: 10
62-) Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant - Atıf Yılı: 2019 Atıf Sayısı: 6
63-) Microstructure and corrosion resistance of alloys of the Mg Zn Ag system - Atıf Yılı: 2019 Atıf Sayısı: 1
64-) Production of 150 cm wide AZ31 magnesium sheet by twin roll casting - Atıf Yılı: 2019 Atıf Sayısı: 2
65-) The influence of nitridation time on the structural properties of GaN grown on Si 111 substrate - Atıf Yılı: 2019 Atıf Sayısı: 4
66-) Microstructure and corrosion behavior of Mg Zn Ag alloys - Atıf Yılı: 2019 Atıf Sayısı: 8
67-) Fundamentals of Magnesium Alloy Metallurgy - Atıf Yılı: 2019 Atıf Sayısı: 29
68-) Microstructural Investigation and the Creep Behavior of Mg-Sr-Mn Alloys - Atıf Yılı: 2019 Atıf Sayısı: 2
69-) Effects of Manganese on the Microstructure and Dynamic Precipitation in Creep Resistant Cast Mg Ce Mn alloys - Atıf Yılı: 2018 Atıf Sayısı: 21
70-) Comparison of the layered semiconductors GaSe GaS and GaSe1 xSx by Raman and photolumiscence spectroscopy - Atıf Yılı: 2018 Atıf Sayısı: 34
71-) Anisotrophy of two photon absorption in gallium selenide at 1064nm - Atıf Yılı: 2018 Atıf Sayısı: 29
72-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment I Propagation of a Crack and Oxidation Phenomena - Atıf Yılı: 2018 Atıf Sayısı: 77
73-) Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site - Atıf Yılı: 2018 Atıf Sayısı: 67
74-) Lattice vibrations of pure and doped GaSe - Atıf Yılı: 2018 Atıf Sayısı: 48
75-) The Effects of Magnesium Particles on Posterolateral Spinal Fusion An Experimental in Vivo Study in a Sheep Model - Atıf Yılı: 2018 Atıf Sayısı: 42
76-) The electrical optical and structural properties of GaN epitaxial layers grown on Si 111 substrate with SiNx interlayers - Atıf Yılı: 2018 Atıf Sayısı: 15
77-) Corrosion and oxidation of alloys of the Mg Y Zr RE system - Atıf Yılı: 2018 Atıf Sayısı: 6
78-) Evolution of Microstructure and Texture in AZ31 Alloy Subjected to Gas Forming - Atıf Yılı: 2018 Atıf Sayısı: 2
79-) Magnesium Films Deposited on Different Substrates via Arc PVD Method - Atıf Yılı: 2018 Atıf Sayısı: 2
80-) Corrected infrared Sellmeier coefficients for gallium selenide - Atıf Yılı: 2018 Atıf Sayısı: 26
81-) Electron microscopical investigation of as cast AZ91D alloy - Atıf Yılı: 2018 Atıf Sayısı: 36
82-) Microstructure and corrosion behavior of Mg Zn Ag alloys - Atıf Yılı: 2018 Atıf Sayısı: 37
83-) Microstructural Investigation and the Creep Behavior of Mg Sr Mn Alloys - Atıf Yılı: 2018 Atıf Sayısı: 19
84-) Advanced production and properties of die cast magnesium composites based on AZ91 and SiC - Atıf Yılı: 2018 Atıf Sayısı: 10
85-) Effect of Manganese on the Creep Behavior of Magnesium and the role of Mn Precipitation during Creep - Atıf Yılı: 2018 Atıf Sayısı: 29
86-) Creep Resistant Magnesium Alloys for Powertrain Applications - Atıf Yılı: 2018 Atıf Sayısı: 464
87-) Fundamentals of Magnesium Alloy Metallurgy - Atıf Yılı: 2018 Atıf Sayısı: 82
88-) Diffusion Bonding of Magnesium Zirconium and Titanium as Implant Material - Atıf Yılı: 2018 Atıf Sayısı: 6
89-) Microstructure and Creep Properties of a Cast Mg-1.7wt Rare Earth 03wt Mn Alloy - Atıf Yılı: 2018 Atıf Sayısı: 23
90-) Non classical Decomposition Products of Austenite in Fe Cr C Alloys - Atıf Yılı: 2018 Atıf Sayısı: 18
91-) Microstrustural Evolution in a Ni-Cr-Co Based Superalloy During Cooling from Melt - Atıf Yılı: 2018 Atıf Sayısı: 3
92-) Optimization of Nd YAG Laser Welding of Magnesium - Atıf Yılı: 2018 Atıf Sayısı: 1
93-) Production of 150 cm wide AZ31 magnesium sheet by twin roll casting - Atıf Yılı: 2018 Atıf Sayısı: 29
94-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment II Carburization and Carbide Transformations - Atıf Yılı: 2018 Atıf Sayısı: 76
95-) Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant - Atıf Yılı: 2018 Atıf Sayısı: 59
96-) Microstructure and corrosion resistance of alloys of the Mg Zn Ag system - Atıf Yılı: 2018 Atıf Sayısı: 8
97-) The effect of GaN thickness inserted between two AlN layers on the transport properties of a lattice matched AlInN AlN GaN AlN GaN double channel heterostructure - Atıf Yılı: 2018 Atıf Sayısı: 8
98-) Addition of B4C to AZ91 via Diecasting and Its Effect on Wear Behaviour - Atıf Yılı: 2018 Atıf Sayısı: 3
99-) Effect of Grain Size on Necklace Formation of Magnesium Alloys - Atıf Yılı: 2018 Atıf Sayısı: 2
100-) The influence of nitridation time on the structural properties of GaN grown on Si 111 substrate - Atıf Yılı: 2009 Atıf Sayısı: 23
101-) Effect of Manganese on the Creep Behavior of Magnesium and the role of alpha Mn Precipitation during Creep - Atıf Yılı: -1 Atıf Sayısı: 7

(E-3) SCI veya SCI-Expanded, SSCI ve AHCI tarafından taranan dergilerde olmak üzere adayın yazar olarak yer almadığı SCI veya SCI-Expanded, SSCI ve AHCI dışında taranan yayınlarda adayın eserlerine yapılan atıf

1-) New Magnesium Alloys with high Elastic Modulus - Atıf Yılı: 2019 Atıf Sayısı: 1
2-) Diffusion Bonding of Magnesium Zirconium and Titanium as Implant Material - Atıf Yılı: 2019 Atıf Sayısı: 2
3-) Non classical Decomposition Products of Austenite in Fe Cr C Alloys - Atıf Yılı: 2019 Atıf Sayısı: 1
4-) Microstructure and Creep Properties of a Cast Mg-1.7wt Rare Earth 03wt Mn Alloy - Atıf Yılı: 2019 Atıf Sayısı: 1
5-) Effect of Manganese on the Creep Behavior of Magnesium and the role of Mn Precipitation during Creep - Atıf Yılı: 2019 Atıf Sayısı: 5
6-) Creep Resistant Magnesium Alloys for Powertrain Applications - Atıf Yılı: 2019 Atıf Sayısı: 21
7-) Evolution of Microstructure and Texture in AZ31 Alloy Subjected to Gas Forming - Atıf Yılı: 2019 Atıf Sayısı: 1
8-) Corrosion and oxidation of alloys of the Mg Y Zr RE system - Atıf Yılı: 2019 Atıf Sayısı: 1
9-) Lattice vibrations of pure and doped GaSe - Atıf Yılı: 2019 Atıf Sayısı: 4
10-) Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site - Atıf Yılı: 2019 Atıf Sayısı: 9
11-) The Effects of Magnesium Particles on Posterolateral Spinal Fusion An Experimental in Vivo Study in a Sheep Model - Atıf Yılı: 2019 Atıf Sayısı: 2
12-) Effects of Manganese on the Microstructure and Dynamic Precipitation in Creep Resistant Cast Mg Ce Mn alloys - Atıf Yılı: 2019 Atıf Sayısı: 4
13-) Anisotrophy of two photon absorption in gallium selenide at 1064nm - Atıf Yılı: 2019 Atıf Sayısı: 1
14-) Addition of B4C to AZ91 via Diecasting and Its Effect on Wear Behaviour - Atıf Yılı: 2019 Atıf Sayısı: 2
15-) Deformation behaviour of a new magnesium ternary alloy - Atıf Yılı: 2019 Atıf Sayısı: 1
16-) Effect of Grain Size on Necklace Formation of Magnesium Alloys - Atıf Yılı: 2019 Atıf Sayısı: 1
17-) Production of 150 cm wide AZ31 magnesium sheet by twin roll casting - Atıf Yılı: 2019 Atıf Sayısı: 2
18-) The influence of nitridation time on the structural properties of GaN grown on Si 111 substrate - Atıf Yılı: 2019 Atıf Sayısı: 4
19-) Microstructure and corrosion resistance of alloys of the Mg Zn Ag system - Atıf Yılı: 2019 Atıf Sayısı: 1
20-) Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant - Atıf Yılı: 2019 Atıf Sayısı: 6
21-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment II Carburization and Carbide Transformations - Atıf Yılı: 2019 Atıf Sayısı: 10
22-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment I Propagation of a Crack and Oxidation Phenomena - Atıf Yılı: 2019 Atıf Sayısı: 8
23-) Microstructure and corrosion behavior of Mg Zn Ag alloys - Atıf Yılı: 2019 Atıf Sayısı: 8
24-) Microstructural Investigation and the Creep Behavior of Mg-Sr-Mn Alloys - Atıf Yılı: 2019 Atıf Sayısı: 2
25-) Effects of Manganese on the Microstructure and Dynamic Precipitation in Creep Resistant Cast Mg Ce Mn alloys - Atıf Yılı: 2018 Atıf Sayısı: 21
26-) Anisotrophy of two photon absorption in gallium selenide at 1064nm - Atıf Yılı: 2018 Atıf Sayısı: 29
27-) Comparison of the layered semiconductors GaSe GaS and GaSe1 xSx by Raman and photolumiscence spectroscopy - Atıf Yılı: 2018 Atıf Sayısı: 34
28-) The Effects of Magnesium Particles on Posterolateral Spinal Fusion An Experimental in Vivo Study in a Sheep Model - Atıf Yılı: 2018 Atıf Sayısı: 42
29-) Lattice vibrations of pure and doped GaSe - Atıf Yılı: 2018 Atıf Sayısı: 48
30-) Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site - Atıf Yılı: 2018 Atıf Sayısı: 67
31-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment I Propagation of a Crack and Oxidation Phenomena - Atıf Yılı: 2018 Atıf Sayısı: 77
32-) The electrical optical and structural properties of GaN epitaxial layers grown on Si 111 substrate with SiNx interlayers - Atıf Yılı: 2018 Atıf Sayısı: 15
33-) Evolution of Microstructure and Texture in AZ31 Alloy Subjected to Gas Forming - Atıf Yılı: 2018 Atıf Sayısı: 2
34-) Corrosion and oxidation of alloys of the Mg Y Zr RE system - Atıf Yılı: 2018 Atıf Sayısı: 6
35-) Magnesium Films Deposited on Different Substrates via Arc PVD Method - Atıf Yılı: 2018 Atıf Sayısı: 2
36-) Corrected infrared Sellmeier coefficients for gallium selenide - Atıf Yılı: 2018 Atıf Sayısı: 26
37-) Electron microscopical investigation of as cast AZ91D alloy - Atıf Yılı: 2018 Atıf Sayısı: 36
38-) Microstructure and corrosion behavior of Mg Zn Ag alloys - Atıf Yılı: 2018 Atıf Sayısı: 37
39-) Advanced production and properties of die cast magnesium composites based on AZ91 and SiC - Atıf Yılı: 2018 Atıf Sayısı: 10
40-) Microstructural Investigation and the Creep Behavior of Mg Sr Mn Alloys - Atıf Yılı: 2018 Atıf Sayısı: 19
41-) Effect of Manganese on the Creep Behavior of Magnesium and the role of Mn Precipitation during Creep - Atıf Yılı: 2018 Atıf Sayısı: 29
42-) Fundamentals of Magnesium Alloy Metallurgy - Atıf Yılı: 2018 Atıf Sayısı: 82
43-) Creep Resistant Magnesium Alloys for Powertrain Applications - Atıf Yılı: 2018 Atıf Sayısı: 464
44-) Diffusion Bonding of Magnesium Zirconium and Titanium as Implant Material - Atıf Yılı: 2018 Atıf Sayısı: 6
45-) Non classical Decomposition Products of Austenite in Fe Cr C Alloys - Atıf Yılı: 2018 Atıf Sayısı: 18
46-) Microstructure and Creep Properties of a Cast Mg-1.7wt Rare Earth 03wt Mn Alloy - Atıf Yılı: 2018 Atıf Sayısı: 23
47-) Microstrustural Evolution in a Ni-Cr-Co Based Superalloy During Cooling from Melt - Atıf Yılı: 2018 Atıf Sayısı: 3
48-) Optimization of Nd YAG Laser Welding of Magnesium - Atıf Yılı: 2018 Atıf Sayısı: 1
49-) Microstructure of HK40 Alloy After High Temperature Service in Oxidizing Carburizing Environment II Carburization and Carbide Transformations - Atıf Yılı: 2018 Atıf Sayısı: 76
50-) Microstructure and corrosion resistance of alloys of the Mg Zn Ag system - Atıf Yılı: 2018 Atıf Sayısı: 8
51-) Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant - Atıf Yılı: 2018 Atıf Sayısı: 59
52-) Production of 150 cm wide AZ31 magnesium sheet by twin roll casting - Atıf Yılı: 2018 Atıf Sayısı: 29
53-) Addition of B4C to AZ91 via Diecasting and Its Effect on Wear Behaviour - Atıf Yılı: 2018 Atıf Sayısı: 3
54-) The effect of GaN thickness inserted between two AlN layers on the transport properties of a lattice matched AlInN AlN GaN AlN GaN double channel heterostructure - Atıf Yılı: 2018 Atıf Sayısı: 8
55-) Effect of Grain Size on Necklace Formation of Magnesium Alloys - Atıf Yılı: 2018 Atıf Sayısı: 2
56-) The influence of nitridation time on the structural properties of GaN grown on Si 111 substrate - Atıf Yılı: 2009 Atıf Sayısı: 23

(F-2) Yönetiminde tamamlanmış yükseklisans tezleri.

1-) Tez Adı: Yüksek alüminyum içerikli magnezyum alaşımları geliştirmek ve bunların ısıl işlem davranışlarının incelenmesi. Konu: Deformasyon Kapasitesi yüksek magnezyum alaşım sistemleri geliştirilmesi. Yiğit-Türe. 2015
2-) Tez Adı: Çok bileşenli magnezyum alaşımları geliştirme. Konu: Çok bileşenli magnezyum alaşımları geliştirme. Alican-Ataman. 2015
3-) Tez Adı: Deformasyon Kapasitesi yüksek magnezyum alaşım sistemleri geliştirilmesi. Konu: Deformasyon Kapasitesi yüksek magnezyum alaşım sistemleri geliştirilmesi. Dilara-Eren. 2014

(G-1) Uluslar arası kuruluşlarca desteklenen ve tamamlanmış proje yürütücülüğü

1-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: İçlerinde çok sayıda ve yerleri tipleri boyutları ve şekilleri bilinen yapay hatalar içeren ve uçak motoru kanatçıkları malzemelerinden yapılmış tahribatsız muayene kalibrasyon blokları üretmek. Proje Türü: Özel Kuruluşlar. Generation of Synthetic Defects and Their Incorporation into Super Alloy and Titanium Bodies for manufacturing NDT Calibration Blocks. 2002-2008

(G-3) TÜBİTAK, TÜBA, KOSGEB (1002 ve 3001 hariç tüm projeler)SBB, Bakanlıklar vb. kamu kurumları veya özel kuruluşlarca desteklenen ve tamamlanan proje yürütücülüğü

1-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: Magnezyum metalinin toksik etki yaratmaksızın vücut içerisinde çözünebilir olması ve kemik tutunmasını artırıcı özelliklerinden yararlanması amacıyla kalıcı implat malzemesi olan titanyum yüzeyine uygulanması konusunun araştırılması. Proje Türü: -Tübitak 1001. Magnesium coated Titanium İmplant Materials. 2008-2010
2-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: Ereğli Demir Çelik İşletmelerinde üretilen mikroalaşımlı çeliklerde vanadyum ilavesinin kalın kesitli çeliklerde 20mm yatmış olduğu etkilerin geçirimli elektron mikrsokobisi teknikleri ile araştırılması çalışması . Proje Türü: Özel Kuruluşlar. Mikroalaşımlı çeliklerde geçirimli elektron mikroskobisi ile mikroyapısal incelemeler . 2007-2008
3-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: Direksiyon sisteminde görülen ve malzeme problemine bağlı klitlenmenin temel nedenlerinin araştırılması FORD A Ş tarafından desteklenen çalışma . Proje Türü: Özel Kuruluşlar. Root Cause Analysis of Failures and Product Improvements via Electron Microscopic Microanalytical Investigations . 2005-2005
4-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: Projenin amacı magnezyum alaşımları için direkt levha döküm teknolojisi olan ikiz merdaneli döküm TRC sisteminin kurulması ve sıvıdan direkt levha dökümü yapılarak üretilecek magnezyum alaşımlarının muhtelif kullanımlarının araştırılmasıdır . Proje Türü: Kalkınma Bakanlığı. Magnezyum Alaşımları Geliştirme ve Otomotiv Elektronik ve Savunma Sanayileri İçin Parça Üretimi. 2004-2008
5-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: Basınçlı döküm yöntemi ile magnezyum alaşımından otomobil direksiyon simidi imalatı . Proje Türü: Özel Kuruluşlar. Magnezyum basınçlı döküm tesisi kurulması BURMAG Ltd Şti . 2002-2003
6-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: Proje askeri içeriklidir ve roket teknolojisi ile ilgilidir Detay verilememektedir Çalışma ROKETSAN A Ş tarafından desteklenmiştir ve MSB Ar Ge için yürütülmüştür . Proje Türü: Özel Kuruluşlar. INVAR alaşımı komponent . 2002-2004
7-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: Şişecam A Ş için camların magnetron sputtering yöntemi ile kaplanmasında kullanılan Cu Sn bimetalik target lerin üretiminde kullanılacak özgün bir yönteminin geliştirilmesi . Proje Türü: Özel Kuruluşlar. Kaplamalı Camlar İçin Kalay Target Üretim Teknolojisi Geliştirilmesi. 2002-2003

(G-3-Eski) TÜBİTAK, TÜBA, DPT, KOSGEB, Bakanlıklar vb. kamu kurumları veya özel kuruluşlarca desteklenen ve tamamlanan proje yürütücülüğü

1-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: . Proje Türü: Sanayi Bakanlığı (SAN-TEZ)PROJESİ. Uçak Yolcu Koltuklarında Magnezyum Alaşımlı Dizaynla Ağırlık Tasarrufu. 2016-2017

(G-7) Tamamlanmış Bilimsel Araştırma Projelerinde (BAP) yürütücülük

1-) Proje Durum: Tamamlandı. Projedeki Görev: Yürütücü. Konu: . Proje Türü: ARAŞTIRMA PROJESİ. Magnezyum Alaşımlarının Nano Boyutlu Taşıyıcı Kullanılarak Eser Miktarda Oksijenle Dopinglenmesi. 2016--1

(G-8) Tamamlanmış Bilimsel Araştırma Projelerinde (BAP) görev alma (araştırmacı, eğitmen, danışman vb. olarak)

1-) Proje Durum: Tamamlandı. Projedeki Görev: Danışman. Konu: . Proje Türü: Yükseköğretim Kurumları tarafından destekli bilimsel araştırma projesi. Dopant İlaveleri ile Magnezyum Alaşımlarında Mukavemet ve Deformasyon Kapasitesinin Geliştirilmesi. 2017-2019

(Ğ-2) Alanında ulusal bilimsel nitelikli ödül almak

1-) Kurum Adı: . TTGV Sanayi uygulamalı doktora tezi ödülü. 2010
2-) Kurum Adı: . Magnesium Application Award. 2009

(H-1) Yurtdışı patent

1-) Patent Sahibi: Ali Arslan KAYA. Production method for tin targets used in magnetron sputtering coating of glass. 2016

(I-3) Uluslararası sempozyum, kongre, çalıştay, festival, bilimsel yaz okulu, bienal, trienal gibi bilimsel, sanatsal ve tasarıma yönelik etkinliklerde başkanlık yapmak. uluslararası sportif organizasyonlarında yöneticilik, düzenleme kurulu üyeliği yapmak.

1-) 17nci Uluslar arası katılımlı Ulusal Elektron Mikroskopi Kongresi. Haziran. Türkiye. 2005

Verdiği Dersler

MME 3004 2023-2024 Bahar

Solidification and Casting II

MME 3012 2023-2024 Bahar

Materials Characterization Techniques II

MME 3016 2023-2024 Bahar

Physical Metallurgy II

MME 3520 2023-2024 Bahar

Alloys II

MME 3522 2023-2024 Bahar

Joining and Welding of Materials

MME 3526 2023-2024 Bahar

Basics of Recycling

MME 4006 2023-2024 Bahar

Application of Materials Processing and Design II

MME 4015 2023-2024 Bahar

Application of Materials Processing and Design I

MME5524 2023-2024 Bahar

Anomalous Behaviour of Metallic Materials

MME 1005 2023-2024 Güz

History of Metallurgy

MME 3003 2023-2024 Güz

Solidification and Casting I

MME 3011 2023-2024 Güz

Materials Characterization Techniques I

MME 3015 2023-2024 Güz

Physical Metallurgy I

MME 3509 2023-2024 Güz

Alloys I

MME 3517 2023-2024 Güz

Materials Research I

MME 4006 2023-2024 Güz

Application of Materials Processing and Design II

MME 4015 2023-2024 Güz

Application of Materials Processing and Design I

MME5535 2023-2024 Güz

Light Alloys Current Status and Future

MME6001 2023-2024 Güz

Advanced Characterization Techniques

MME 3004 2022-2023 Bahar

Solidification and Casting II

MME 3012 2022-2023 Bahar

Materials Characterization Techniques II

MME 3016 2022-2023 Bahar

Physical Metallurgy II

MME 3520 2022-2023 Bahar

Alloys II

MME 3522 2022-2023 Bahar

Joining and Welding of Materials

MME 3526 2022-2023 Bahar

Basics of Recycling

MME 3528 2022-2023 Bahar

Materials Research II

MME 4006 2022-2023 Bahar

Application of Materials Processing and Design II

MME 4015 2022-2023 Bahar

Application of Materials Processing and Design I

MME5522 2022-2023 Bahar

New Alloy Design Principles New Generation Steels

MME 1005 2022-2023 Güz

History of Metallurgy

MME 2517 2022-2023 Güz

Environmental Impact of Metallurgical and Materials Industry

MME 3003 2022-2023 Güz

Solidification and Casting I

MME 3011 2022-2023 Güz

Materials Characterization Techniques I

MME 3015 2022-2023 Güz

Physical Metallurgy I

MME 3509 2022-2023 Güz

Alloys I

MME 3517 2022-2023 Güz

Materials Research I

MME 4015 2022-2023 Güz

Application of Materials Processing and Design I

MME5535 2022-2023 Güz

Light Alloys Current Status and Future

MME6001 2022-2023 Güz

Advanced Characterization Techniques